Competent enough to handle almost any patient transfer task.
mouseover for larger image
Oxford Presence Patient Hoist
The Oxford® Presence is a heavy-duty mobile patient lift, competent enough to handle almost any patient-handling task.
Its incredible lifting range ensures it can cope easily with the most critical of transfers from the floor to high level surfaces.
Safe Working Load 227kg
Outstanding lifting range (440mm — 1910mm)
On-board Smart™ Monitor diagnostic control box
Ergonomic design considerations
Powered leg positioning
Interchangeable spreader bar ⁄ cradle configurations
The Presence was designed with the five key principles of moving and handling in mind.
Get close to the load
Use a wide stable base
Ensure a comfortable firm grasp
Keep spine close to neutral
Make sure movement is smooth
Hand control clip ensures convenient storage when not in use.
Foot ‘push pad’ helps reduce the force needed to initiate forward movement.
Over-sized push handle for improved handling and manoeuvrability.
Outstanding lifting range
Whether from the floor or onto a high surface the Presence has an astonishing range of movement.
The minimum height with the six point spreader bar is just 440mm, which ensures excellent off the floor
Conversely, if you wish to access high beds or nursing surfaces, the Presence will lift up to 1910mm.
This is especially useful where you have variable height beds, special lift mattresses.
The Smart™ Monitor control system records the exact amount of work completed by the actuator each and every time the lift is used,
regardless of a patient’s weight or lift height covered. The intelligent system advises the user to schedule key maintenance helping to ensure your lift remains in optimum condition.
Identifies total lift actuations and work completed
Identifies lift overloads (exceeding SWL)
Identifies service interval periods
Increases patient safety and product service life
Sculptured design allows you to get closer to the lift
Greater spatial area for carer and patient
The additional space promotes better ergonomics for the carer, as it is possible to interact
more closely with the patient.
The Presence's unique Swan-neck leg design also allows the lift to get close to the widest of
obstacles. This is especially useful when encountering large chairs, bulky commodes and wheel
Powered Leg Positioning
The Presence has two powerful electric motors which open and close the legs automatically.
Tapered ‘swan neck’ leg design
Allows greater internal area, whilst not compromising overall product width.
Low Leg Option
The low leg Presence maintains the exact same functionality of the standard Presence with the added benefit of a lower leg height to allow better access under low bed frames and other furniture.
Lift height, safe working load and all other elements remain unchanged.
One of the restrictions of using certain lifts are the slings which you can use on the product.
The Presence however, gives you a choice of sling systems.
You can use the conventional 6 point Oxford spreader bar (C), or the manual (D) or powered 4 point positioning
cradle (B). This choice provides the carer with a greater option of slings to use when considering support,
comfort and flexibility for the patient.