Mortuary Fridges & Freezers

Mortuary Refrigerators

These Refrigerators are Australian designed and manufactured to give the advantages of modern frost-free refrigeration and automatic temperature control.
Modular design allows gradual expansion of facilities as additional units can be aligned with cabinets already installed.
The cabinets can be reduced to the correct operating temperature within 20 minutes.
This also allows the number of units being kept under refrigeration to be used according to demand.
Stainless steel cabinet and stretchers ensure hygiene at clinical level.

mouseover for larger image

NMR3

NMR3 Mortuary Refrigerator Dimensions

Dimension Bariatric 2 door Refrigerator, front

Dimension Bariatric 2 door Refrigerator, side

Inside view showing
polyproplyene glide rollers

NMR1

NMR2

NMR2 showing trays

Click here for a Brochure

Click here for a Bariatric Brochure

Mortuary Refrigerators & Freezers

• Easy Glide out Staniless Steel Stretchers on Polypropylene Glide Rollers
• Large Control Panel with built in alarms – Audio & Visual with reactivation alarm & Mute Function for Alarm
• A digital display of the internal temperature is visible at all times
• Specifically built to maintain temperatures of between 2°C and 4°C with even temperature throughout.
• Freezers built to maintain temperatures of between -18°C and -22°C with even temperature throughout.
• Voltage free contacts which allow the alarm conditions to be continually monitored via a remote system within or external to a facility.
• Incorporates features that ensures the cadaver is not compromised when power fails
• Designed so that air and temperature loss is minimised when loading and unloading
• Interior Lighting
• Top Mounted Refrigeration System that requires no installation
• Waste Fitting for Hosing out
• Stainless Steel Interior and Exterior
• Alarm and recorder sensors are easily accessible and tolerate movement
• Uses a CFC Free Refrigerant
• Secured access to the Refrigerators ⁄ Freezer
• Castors standard

• Optional Equipment:

• Remote alarm, NUL-VFC
• Port entry, NUL-PE
• Battery backup for controller, NUL-BB
• Packing Local, NUL-MORT-PL
• Packing Interstate, NUL-MORT-PI
• Packing Crate

Mortuary Refrigerator & Freezers
Model	NMR1	NMF1	NMR2	NMF2	NMR3	NMF3	NMRB1	NMRB2
Capacity (Doors)	1		2		3		1	2
External Dimensions	860w x 2500d x 1265h	910w x 2950d x 1315h	860w x 2500d x 1790h	910w x 2950d x 1840h	860w x 2500d x 2325h	910w x 2950d x 2375h	1140w x 2500d x 1370h	1140w x 2500d x 2010h
Internal Dimensions	690w x 2350d x 670h	790w x 2700d x 870h	690w x 2350d x 1220h	790w x 2700d x 1180h	690w x 2350d x 1780h	790w x 2700d x 1550h	940w x 2350d x 850h	940w x 2350d x 1490h
Weight	150 Kg		275 Kg	250 Kg	345 Kg	350 Kg	175 Kg	285 Kg
Voltage	240V
Watts	1080w	1680w	1454w	1975w	1872w	2110w	1872w	2050w
Refrigerant	134a
Warranty (*refer to warranty sheet)	12 Months *
Body Trays	1		2		3		1	2
Tray Size	610 x 2055						890 x 2055
Digital Display
Castors
Interior ⁄ Exterior Cabinet Finish	Stainless Steel
Insulation	50 mm	100 mm	50 mm	100 mm	50 mm	100 mm	50 mm
High ⁄ Low Temperature Alarm
Fan Forced Refrigeration System
Door Lock
Solid Door
SWL	225kg						300kg
** Specifications may change without prior notice **

Click here to enquire about the Mortuary Refrigerators.

Click here to enquire about the Bariatric Mortuary Refrigerators.

STRETCHERS

• Stretchers are made of stainless steel
• The tubular frame holding the stretcher tray has integral hand slides at both ends.
• The stretchers are mounted on polypropylene glide rollers for easy handling.
• The tubular construction of the stretchers makes them light in proportion to their load–bearing capacity.

Tray dimensions for standard 610mm and bariatric 890mm

STACKER TROLLEYS

A stacker trolleys are available as an optional extra for easy stretcher loading.

INSTALLATION AND CLEANING

• The refrigerator should be installed in a level position in a well–ventilated position.
• All refrigerator units run on 240V 10amp single phase.
• The air inlet for the motor is at the front grill — the air outlet is on top of this unit at the front.
• Internal cleaning can be achieved by a hose or other means as the cabinet is provided with a drain point at the front.
• It is important to direct the hose away from the evaporator motors and all power.
• The power cord is on the left side of cabinet at the top approx 300mm from the front.
• As the above items are at the front ⁄ front top of the unit, the units are able to be positioned against walls or other units at the sides and rear — no clearances needed.
• In small areas an exhaust fan may be required.

CONSTRUCTION

• Cabinets are built on the monostructure system which combines maximum useful internal space with minimum floorspace requirement.
• They are robust without being unduly heavy or bulky.
• The internal and external shells are stainless steel which combines clinical cleanliness and durability with a permanent attractive appearance.
• Polyurethane insulation is used to meet the particular requirements of refrigeration in mortuaries.

LEGS

• Castors as standard.

FITTINGS

• Fittings comprise heavy-duty chromium–plated handles and hinges
• Magnetic door gaskets
• Temperature indicator, on ⁄ off switch and running light.
• Option: Each door can be fitted with a holder for an identification card.

REFRIGERATION

• Top Mounted Refrigeration System that requires no installation.
• All cabinets are temperature controlled individually and can be isolated when not in use.
• Within the cabinet is a frost–free forced air circulation system and automatic temperature control.
• The refrigeration system is designed for a storage temperature of +2 ⁄ +4°C in an ambient temperature of 43°C.
• Temperature Ranges: Refrigerators 2°C to 4°C, Freezers to -18°C to -22°C;

DRAINS

• A 38mm drain is provided for connection to existing plumbing.
• An S ⁄ trap should be fitted between the cabinet drain outlet and existing plumbing.

Return to top of page