Highly developed technology resulting in reliable measurement results and time efficiency.
mouseover for larger image
Riester RVS-100 Vital Signs Monitor
Advanced vital signs monitor for pulse oximetry, blood pressure and temperature measurements.
Riester’s RVS-100 is an advanced vital signs monitor which offers pulse oximetry, blood pressure and temperature measurements.
The device has ‘Monitor’, ‘Spot-Check’ and ‘Triage’ profile options and a high performance touchscreen.
The RVS-100 can communicate through a wired or wireless connection to the hospital’s EMR, according to the HL7 standard.
3 measurement modes (Monitor, Spot-check, Triage)
High-sensitivity 8" TFT colour touch screen with self-explanatory user interface and integrated help-function
Clinical grade NIBP* including averaging mode (*includes neonate mode)
Programmable NIBP averaging mode (2-5 readings)
Nellcor* Oximax SpO2 (*includes neonate mode)
Predictive Thermometer (Filac 3000)
Connectivity with the EMR – follows the HL7 standard
LAN Connectivity as standard
Programmable alarms (audible, visible) with 3 priority levels
Supports nurse call RJ11 port
Internal memory for 5,000 measurements
Lithium-ion battery with 11 hours run time (Automatic mode, 15min intervals)
Lithium-ion battery with up to 17 hours ON time
2 year warranty
Optional Stand including basket for storage (cuffs, sensors, cables)
Thermal printer (internal)
Mobile stand including basket for storage (cuffs, sensors, cables)
Accessories supplied with monitor:
NIBP extension tube
2 cuffs (adult & adult large incl. connectors)
SpO2 sensor adult
SpO2 extension cable
Oral temperature probe*
(*only if pred. thermometer module is ordered)
Mobile & Precise
The highly flexible, modular design offers many configurations and settings to suit the needs of hospitals, nursing homes and private practices, as well as long-term care settings.
100 – 240 V AC, 50 ⁄ 60 Hz
Lithium-Ion battery, rechargeable, 10.8 V DC, 6,600 mAh, Charging time to a 100%: 6 hours,
Operating time approx. 11 hours (new and fully charged battery at 25°:C ambient temperature with connected SpO2,
Temp, and NIBP on AUTO mode (15 minutes interval)) Low battery indicator, Charging battery indicator
L x H x W: 303 x 230 x 110mm
3.6kg including temp module, printer
L x H x W: 270 x 225 x 200mm
Visible LEDs (Yellow, Red, Blue, Green, Orange)
Gives audible alarm, QRS tone
Supports Pitch Tone and multi-level volume
Alarm tones meet the requirement of IEC 60601-1-8.
Alarm Pressure: 45 dB to 85 dB test distance is 1 meter from the tone.
1 x AC power inlet
1 x standard RJ45 interfaces.100 BASE-TX, IEEE 802.3
4 x USB ports
1 x Equipotential grounding point
1 x RJ11 connector for nurse call
DC out port 15V ⁄ 1.2 A Clinical-grade NIBP (non-invasive blood pressure)