Evocare Home Page
Return to home page

Search Alphabetical Product List

Bedpan Washer Disinfector

Energy Saver on power and water.

Malmet Logo

All Malmet products are manufactured in the facility at Leeton NSW, which is ISO 9001:2015 and ISO 13485:2016 Certified.

Malmet Bedpan, Urinal Bottle & Utensil/Bowl Washers comply with AS 4187:2014, Reprocessing of reusable medical devices in Health Service Organisations, and the relevant parts of ISO 15883 for Washer Disinfectors. The equipment has been microbiologically tested as per recommendations outlined in ISO 15883 by an independent NATA Certified Laboratory to ensure the wash efficacy is satisfactory for the intended load.

Malmet Energy Saver Bedpan Washer Disinfector

ES Detergent Model

ESD91 Detergent Model

The new Australian Standard, AS4187–2014 (which references to ISO15883) makes a detergent wash of RMDs (Recyclable Medical Device, e.g. Bedpan) mandatory since Dec 2016.

5 litre bottle capacity

30ml dispensed per application.

 detergent for Malmet Combination Washer Disinfector

A detergent system delivers 30ml of concentrated detergent in the initial wash.

Detergent Datasheet pdf

Designed in Australia with patented innovations.

ARTG Certification

Energy Saver Bedpan Washer Disinfector

mouseover for larger image
ESD Bedpan Washer Disinfector

Energy Saver Bedpan Washer Disinfector

ESD Bedpan Washer Disinfector, Open

  • Energy saving — Low water and power consumption
  • Large capacity — 2 urinal bottles and 1 bedpan per cycle
  • Accommodates large slipper pans
  • Energy Efficient — Available in 10 Amp & 20 Amp, single phase
  • Pre-wash detergent cycle
  • Hands free operation — To minimise infection risk
  • Minimise hot water use — Steam Disinfection to higher Ao600 level as recommended by AS4187:2014 ⁄ ISO15883
  • Non-vented — Stand alone
  • Infection Control: Microbiologically tested by independent NATA certified laboratory – (Click for Disinfection Validation Study pdf)
  • Compliance: ISO 13485 & AS ⁄ NZS ISO 9001
  • Malmet Door Obstruction Feature – This is factory set to 12Nm ±10%; causing the door to re-open when an obstruction is detected. This is designed to protect the integrity of the machine and the articles within.

Information  ES Energy Saver Models

Information  ES Specifications

Malmet Energy Saver Bedpan Washer Disinfector range is the most efficient and effective method of cleaning and disinfecting bedpans and urine bottles.

Independently micro tested, Malmet machines are proven to inactivate organisms, bacteria and viruses, found in bedpans and bottles.

The detergent wash ensures that faeces etc are properly removed before the final steam disinfection, ensuring efficacy to the highest relevant Australian and ISO standards. Also, designed with the environment in mind, the ES-D range of products has one of the lowest energy usage rates in the industry.

Universal Cradle is fitted to all ES Washer Disinfector models

  • The Energy Saver Bed Pan Washer Disinfector fitted with a Universal Cradle can accommodate:
    • Standard size bed pans
    • Standard commode bowls
    • Standard male and female urine bottles
    • Most plastic urine bottles including male non-spill and female adaptor
    • Large and regular size slipper pans
  • Product Code upgrade: 91-3053
  • Universal Cradle Brochure pdf

Certifications and Compliances
ARTG Registration Number 232012 Class IIb; Electrical Safety Certificate: CS 10082N; Watermark Certificate: WMKA21156

email Click here to enquire about the Malmet Energy Saver Bedpan Washer Disinfector, ES91.

The Malmet Energy Saver

Click here for Datasheet pdf       Click here for ES Brochure pdf

inside Washer Disinfector inside Washer Disinfector inside Washer Disinfector inside Washer Disinfector

               2 Urinal Bottles & Bedpan                            2 Urinal Bottles & Slipper Pan                            2 Urinal Bottles & Large Bowl                            2 Urinal Bottles & Small Bowl

Features to Control Infection

  • A total hands–free procedure for each disinfecting cycle — utilizing sensor beam breaks. No need to touch the machine or control pad.
  • The internal chamber is cleaned and disinfected during each cycle.
  • Steam and detergent disinfection of equipment is above the Australian Standards in temperature generation and length of cycle.
  • Hands Free Operation – Zero Contamination – No infection risks to patients or staff.
  • Odourless disinfection – No bacterial masking or fragrance sprays required.

No disposable containers or consumables required

  • Bed pans and urinal bottles are disinfected ready–for–reuse.
  • No disposable container holders to wash or disinfect.
  • No additional waste imposed on the local government community's sewerage system.
  • No worrying about possible imposition of surcharges for excess waste into the sewerage system.
  • Not excluded for use by any local authority or council.
  • Only detergent and natural body waste is flushed into the sewer.


Product Code Description Trap Power Power Comsumption (kwh) Average Cycle Times (minutes) Water Comsumption (litres)
ES91-1002 Energy Saver Washer Disinfector ES915 “S” 20A 0.300 5.30 36
ES91-1007 Energy Saver Washer Disinfector ES915 “P” 20A 0.300 5.30 36
ES91-1022 Energy Saver Washer Disinfector ES935 “S” 10A 0.236 7.50 35.05
ES91-1027 Energy Saver Washer Disinfector ES935 “P” 10A 0.236 7.50 35.05
91-5056 1 litre Jug Holder Cradle to suit ES disinfector

Click here for Operation Manual on ES91 pdf

Click here for Spare Parts Catalogue pdf

Positioning of Bedpan Washer Disinfector (Freestanding Model)
Model Placement Access Required Device Dimensions
Height (mm) Width (mm) Depth (mm)
ES91- Freestanding Both Sides 1305 595 660
For Freestanding model, please allow sufficient room for servicing purposes. Recommended space requirements 200mm on either side and 150mm at the rear of the unit. (see installation manual)
Service Connections
Model Cold Water Soil Line Electrical
ES91-1002 ⁄ ES91-1007 GB¾ Male 100mm ‘S’ or ‘P’ 240V 1 phase @ 20 amps 50 hertz
ES91-1022 ⁄ ES91-1027 GB¾ Male 100mm ‘S’ or ‘P’ 240V 1 phase @ 10 amps 50 hertz
No external vent pipe work is required as the device is designed to condensate all visible steam internally.
NOTE: Plumbing connection must comply to AS3500
Power and Water Consumption Data
Model Avg Cycles per ⁄ Hr Avg Cycle min ⁄ sec Avg kWh per cycle CW Avg Lt per cycle
ES91 20A DET 11 5.3 0.300 36
ES91 10A DET 7.7 7.5 0.236 35.5
NOTE: Values may change due to operating and supply service conditions.

Specifications 20A ⁄ 10A model

Electrical Rating
ES91-1002 ⁄ ES91-1007
Phase ⁄ Hertz
1 ph ⁄ 50 Hz
Environment operating conditions Temperature
Relative Humidity
+10°C to +25°C
+30% to 70%
Element (ES91-1002 ⁄ ES91-1007) Rated
Overtemp protection
Thermal cut-out switch 3 pole set point 115°C Manual reset
Electrical Rating
Models ES91-1022 ⁄ ES91-1027
Phase ⁄ Hertz
1 ph ⁄ 50 Hz
Element (ES91-1022 ⁄ ES91-1027) Rated
Overtemp protection
Thermal cut-out switch 3 pole set point 115°C Manual reset
Fuse: Transformer Cylinder type F3.15AL 250V
Fuse F1 : Power supply PCB Cylinder type T315mA 250V
Spray System Main Wash

Cool Down
1 x rotating 180° nozzle
2 x fixed 60° nozzles
2 x fixed 0° uninary nozzles
1 x fixed 60° nozzle
Wash Chamber Material
1.2mm Stainless Steel
2 x urinal bottles + bed pan + lid OR
2 x urinal bottles + commode bowl + lid OR
2 x urinal bottles + small commode bowl + lid OR
2 x urinal bottles + slipper pan + lid OR
2 x urinal bottles + large slipper pan + lid
Soil Line Connection
Complies to AS 2887 & AS ⁄ NZS 3500.2:2003
‘S’ or ‘P’ Trap (6mm PE)
100mm ID
Backflow Prevention
AS 2845.2 – 1996
Air Gap (RAG)  
Water Supply Cold Temp – Pressure (Static) 5 – 25°C @ 100 – 400kpa
Water Inlet Valve connection
WRAS Certified
Solenoid 240V GB¾ Male
Hose – valve to Cold Water Tank
WRAS Certified
Stainless Steel Braided 10mm
Frame Material Stainless Steel
ARTGC Class 1
Malmet specific (5Lt) Detergent concentrate Caustic Alkaline
Environmental conditions
Transport and Storage
Fragile, Keep away from rain
Do not stack
-5°C to +50°C

top Return to top of page