Evocare Home Page

Utensil Washer Disinfector

Designed to hold 6 large wash basins or a varied load.

Malmet Logo

Malmet Logo

All Malmet products are manufactured in the facility at Leeton NSW, which is ISO 9001:2015 and ISO 13485:2016 Certified.

Malmet Top Loading Utensil Bowl Washer Disinfector
Malmet Top Loading Utensil Bowl Washer Disinfector

Malmet Top Loading Utensil ⁄ Bowl Washer Disinfector

Malmet Energy Saver Bedpan Washer Disinfector

Malmet’s Washer Disinfectors are purpose-built washer disinfectors, and are indeed engineered to last a lifetime. The machines are user-friendly and simple to operate.

This Malmet Top Loading Washer Disinfector is designed to hold 6 large wash basins or a varied load of smaller items such as kidney dishes, sputum bowls, tooth mugs etc.

Key Points of Interest

  • Top loading heavy duty, purpose built utensil washer
  • User friendly single button start
  • Computer monitored door lock safety mechanism
  • Large capacity
  • Used for kidney dishes, sputum bowls, tooth mugs, etc
  • Temperature display
  • Visual detergent refill indicator
  • Disinfection to higher Ao600 level, as recommended by AS ⁄ NZS 4187
  • Compliance: ISO 13485 & ISO 9001

Inside Utensil Washer Disinfector

Washer Disinfector inside Washer Disinfector loaded

Inside Malmet Utensil Washer Disinfector

Washer Disinfector inside

Kidney dish rack

Washer Disinfector loaded

Instrument Basket assembly

Optional rack assemblies

Secure and safe disinfection

  • A computer monitored door lock mechanism – it cannot be opened until the cycle is complete.
  • It is equipped with an "intelligent" microprocessor developed for Malmet which incorporates the fine–tuning of experience with the best features of heavy–duty industrial electronics.
  • Over Temperature Protection – An element over temperature thermal switch with a manual reset.
  • ARTG Certificate pdf

Malmet detergent

A detergent system delivers 30ml of concentrated detergent in the initial wash.

Detergent Datasheet pdf

Important internal components

Washer Disinfector Over Temperature Washer Disinfector Element Cover Washer Disinfector Element Cover

WDT2.1 Utensil Washer Disinfector specifications

Model   WDT2.1 - Top Loading
Electricity Supply - (Australia Only)   240V 18Amp 50Hz
Water Supply   Cold and Hot (min 43ºC)
Dimensions (mm)   655W x 840D x 1030H
Internal Dimensions   595W x 480D x 595H
Water Capacity   18.5 litres
Pump Circulation Electrical rating 0.55 kW
  Capacity at head 2.25m³/hr at 31m head
Pump drain Electrical rating 0.16 kW
  Capacity at head 45 litres/min @ 1.25m head
Pump detergent Type and make Ub 260 C
Detergent usage   Approx. 65ml per cycle
Detergent type   Malmet or equivalent
Temp display   0 - 100ºC coil meter
Thermistor probe   Resistance 22k ohms at 25ºC
Electric element rating   3.6kW 240V
Cold water Consumption /cycle 32 litres
Hot water Consumption /cycle 48 litres
PCB   Yes
Electrical rating of unit   240 V 18A full load
Cycle times   Approx. 28 minutes with 60ºC incoming hot water at 350 kPa
Disinfecting times
70ºC - 15 minutes
75ºC - 10 minutes
80ºC - 5 minutes
85ºC - 2 minutes
Materials Wash chamber & external panels 304 stainless steel
Base tray & frame 304 stainless steel

top Return to top of page

© 2024 Evocare Australia Pty Limited. All rights reserved. ABN 98 078 566 604