Ceiling Brackets for single track and room–covering systems.
mouseover for larger image
GH Ceiling Bracket
The GH ceiling bracket is for straight rails and rail curves.
Use
The GH ceiling bracket is used for both single track and room–covering systems.
The distance between the upper edge of the rail and the ceiling must be 25 mm.
GH Ceiling Bracket
Installation
Depending on the underlying surface, the GH ceiling bracket should be secured to the ceiling with one or two bolts.
The bracket can be used on concrete and wooden ceiling.
Note: The bracket cannot be used with a single track system if this is combined with a
room–covering rail system.
GH Extended Ceiling Bracket, free length for straight rail and curve
Use
The GH extended ceiling bracket, free length (with aluminium profile) is used in connection with suspended ceiling constructions.
The bracket is primarily used in rooms with high ceilings in order to be able to install the rail system beneath the suspended
ceiling at an ordinary installation and users’ height.
Installation
The GH extended ceiling bracket, free length, is joined by sawing the aluminium tube to the required length.
Note: There is no limitation with regard to the length of the GH suspended ceiling bracket, free length.
But in connection with longer lengths the bracket should be anchored to the wall with a stabiliser bracket to
stabilise the rail system and ensure that the construction is solid even with a long suspension.
GH Extended Ceiling Bracket, free length – for sloping ceiling
Use
An adjustable angle GH extended ceiling bracket, free length (with aluminium profile) is used in rooms with sloping ceilings.
Installation
An adjustable angle GH extended ceiling bracket, free length, is connected by sawing the aluminium tube to the required length.
The aluminium tube is first mounted on the U profile of the bracket.
The bracket is then installed on the ceiling in the same way as with the other suspended ceiling brackets –
but the angle can be adjusted on this type.
Note: Must not be used in systems with a maximum load over 250 kg.
Used in connection with suspended ceiling constructions.
The bracket is primarily used in rooms with high ceilings in order to be able to install the rail system beneath the
(suspended ceiling) at an ordinary installation and users' height.
Installation
The GH ceiling bracket straight lowered is joined by sawing the aluminium tube to the required length and
typically only the part that is visible beneath a suspended ceiling.
A rosette is then mounted on the aluminium tube next to the suspended ceiling.
Note: There is a limitation with regard to the length of the GH ceiling bracket straight lowered of maximum 2000mm.
However, when the length of the bracket is above 300mm, the brackets should be anchored to the wall or ceiling with
stabilizing brackets in order to stabilize the rail system and ensure that the construction is stable.