With optional KSG Combinable Side Rails on one side
Burmeier Gigant Heavy Duty Care Bed
Burmeier Gigant II Heavy Duty Bed with DSG & optional KSG Side Rails.
Gigant with optional KSG (Combined Side Rail) on one side.
Gigant Heavy Duty Bed Specifications
|Safe Working Load:
|High / Low:
|400 to 800 mm, range = 400 mm
|Mattress Base Size:
|1200mm x 2000mm
|100mm Individually Locking Tente Castors
|24 Volt Fully Electric
|0° - 70°
|0° - 26°
|Foot end down:
|DSG – Continuous Side Rail on one or both sides
KSG – Combined Side Rail on one or both sides
|Frame - Polyester Powder Coated
Wooden surround with integrated side frames.
Working timber areas melamine covered—0.6mm.
Gigant Heavy Duty Bed and Mattress Codes
|Gigant Heavy Duty Bed Codes
|EV94B4GTII – 1200mm
|Gigant Heavy Duty Bed, 4 section (Beech)
|EV9743 – 1200mm
|Maxi Pressure Care Mattress 2000 x 1200 x 180 (Bravo Cover)
Gigant II Care Bed Features
The Bed Ends with wooden surrounds in a modern design, plastic panels on the chassis and side facings lend a home-like ambience
The emergency release of the backrest possible from any bed position. In the event of power supply outages or electrical drive system failures, the raised backrest can be lowered by hand.
Extremely sturdy safety side construction.
The locating sleeve for mobilisation support (left) and locking box (right) to disable hand control buttons. The handset and locking box are connected to one another. This means that it is only possible to use the adjustment functions on the handset if the corresponding function is activated on the locking box.
Water resistant—IP66. Simultaneous adjustment of the back and thigh rest (Auto-contour). For safety reasons, the handset features a number of locking functions. These locking functions can be used to lock the handset functions and prevent the bed from being adjusted to protect patients‘ in poor clinical condition. Elastic hook can be hooked onto the bed.
24 Volt drive system as standard
For the safety of patient and user, safety low-voltage of 24 volt is produced by means of a transformer.
All drive motors and the hand switch are hooked up to the central control unit by plug-in connections and work with the 24 volt safety low-voltage.
Mains cable holder
The head section of the bed is fitted with a mains cable holder on each side of the bed underneath the mattress base frame.
The mains cable must always be hooked into the mains cable holder before the bed is moved.
Individually locking, robust TENTE castors.
Electric Knee Break with manually adjustable lower leg rest.
Bed extension including longer safety sides and side boards.
Patient Lifting Pole with grab handle can be attached. The patient can use this grab handle to sit up and readjust their position.
Under bed clearance for all commercially available lifters.
Return to top of page