Dali Low Entry Care Bed (24V) Spare Parts
Spare Parts for Dali Low Entry Care Bed
Click to select view:
Chassis, Mattress Base,
Mattress Base Head, Mattress Base Foot,
Drive System, Safety Sides,
Lifting Pole, Accessories,
1.1 Chassis ends |
1.1.1 |
|
chassis head section with lifting motor LA24 and wooden board |
216292 |
1.1.2 |
|
chassis foot section with lifting motor LA24 and wooden board |
216293 |
1.2 |
|
wooden board |
175271 |
1.3 |
|
castor Ø75mm |
171192 |
1.3.1 |
|
screw M10 x 30mm |
177829 |
1.3.2 |
|
Serrated lock washer Ø 10.5mm |
209395 |
1.4 |
|
Tri-Grip bolt M8 x 18mm |
152251 |
1.5 |
|
sleeved nut for wooden board, 13 x 8 x 10 x M6 |
106934 |
1.6 |
|
Bolt M6 x 12 |
166107 |
1.7 |
|
plug for transverse spar 60 x 30mm |
164825 |
1.8 |
|
Bolt for lifting motor Ø10 x 35mm |
182476 |
1.9 |
|
Locking washer for lifting motor Ø10mm |
102555 |
2 mattress base |
2 |
|
Metal slat mattress base (200 x 90cm) with motors |
195317 |
2.1 mattress base head section, metal slats |
2.1 |
|
mattress base head section, metal slats, without motor |
197664 |
2.1.1 |
|
back rest (inner frame) without motor, metal slats |
209521 |
2.1.2 |
|
circlip, metal ⁄ size15 DIN6799 |
167385 |
2.1.3 |
|
Black square plug, plastic 20 x 20 x 3mm |
100105 |
2.1.4 |
|
Tri-Grip bolt M8 x 18mm |
152251 |
2.1.5 |
|
quick release bolt, back rest motor, Ø10 x 60mm |
200395 |
2.1.6 |
|
collar bolt Ø10 x 55mm (for back rest ⁄ thigh rest motor) |
200394 |
2.1.7 |
|
lock washer (open) Ø10mm (for back rest ⁄ thigh rest motor) |
102555 |
Return to top of page
2.2 mattress base foot section |
2.2 |
|
Mattress base foot section without motor, metal slats |
197666 |
2.2.1 |
|
thigh and lower leg rest (inner frame) without motor, metal slats |
197663 |
2.2.2 |
|
circlip, metal ⁄ size15 DIN6799 |
167385 |
2.2.3 |
|
Black square plug, plastic 20 x 20 x 3mm |
100105 |
2.2.4 |
|
Tri-Grip bolt M8 x 18mm |
152251 |
2.2.5 |
|
quick release bolt, thigh rest motor, Ø10 x 60mm |
200395 |
2.2.6 mattress base foot section pivot |
2.2.6 |
|
blind rivet Ø6.4 x 14mm, (connection thigh ⁄ lower leg rest) |
179334 |
2.2.7 |
|
washer, metal Ø6.4mm (connection thigh ⁄ lower leg rest) |
106043 |
2.2.8 |
|
ratchet, short |
169827 |
2.2.9 |
|
lock washer Ø8mm (for ratchet) |
106067 |
2.2.10 |
|
Self-adhesive white stripe 1000 x 18 x 1mm |
192516 |
4 safety sides |
4.1 |
|
assembly set for safety side guidance |
188731 |
4.2 |
|
bracket buckle 330mm for safety side guide |
191714 |
4.3 |
|
safety side, timber 2020 x 95.5mm |
191245 |
Return to top of page
3. Drive System |
3.1 |
|
hand control with locking function |
170704 |
3.1.1 |
|
hook for hand control |
158919 |
3.1.2 |
|
locking key |
167882 |
3.2 |
|
Switch Mode power supply SPMS4 (IP44) |
202171 |
3.3.1 |
|
back rest motor LA27 (previous model) |
185070 |
3.3.2 |
|
back rest motor LA24 (follow-up model) |
207578 |
3.4.1 |
|
thigh rest motor LA27 (previous model) |
170701 |
3.4.2 |
|
thigh rest motor LA24 (follow-up model) |
207579 |
3.5.1 |
|
lifting motor LA27 (previous model) |
170702 |
3.5.2 |
|
lifting motor LA24 (follow-up model) |
207577 |
3.6 |
|
cable harness 4-motors (24Volt) |
170705 |
5. lifting pole |
5.1 |
|
lifting pole |
146602 |
5.1 |
|
lifting pole without grab handle |
160802 |
5.2 |
|
grab handle |
222225 |
5.3 |
|
lifting pole end cap, topas |
182111 |
Accessories |
Number |
designation |
article number |
A |
lifting pole with grab handle |
146602 |
B |
padded safety side cover for 2-bar side rail |
156788 |
C |
serving tray to lay on the wooden safety sides |
174296 |
D |
reading lamp with fastening (claw) to lifting pole |
175591 ⁄ 174231 |
E |
reading lamp with adapter for the lifting pole sleeve |
196221 |
F |
storage and transport aid |
171063 |
G |
infusion holder (5200-28-50) |
116354 |
H |
bed leaving aid (with claw fixing) |
175402 |
I |
wooden cover for head or footpart of chassis (single) |
190277 |
J |
wooden cover for head or footpart of chassis (set=2 pcs) |
190080 |
© 2024 Evocare Australia Pty Limited. All rights reserved. ABN 98 078 566 604