Burmeier Allura II Care Beds

Burmeier Allura II Care 4 Section Electric Nursing Home Beds

mouseover for larger image

Allura II Bed (with optional timber cover for footboard)

Allura II Bed shown with Cherusker Bedside Locker ⁄ Overbed Table

Features at a Glance

• Kingsize 4-section mattress base has metal slats and is able to be dismantled.
• Safe working load: 250kg
• Selectively locking handset with auto-contour and robust construction
• Adjustable Back Support and Upper Leg Rest
• 100mm high–quality, rugged Tente castors
• Wooden surround with integrated side frames in beech finish, optional headend and footend covers available
• Linak drive system with 24 Volt technology, live 240 Volt components are outside the bed
• All Allura beds except the Mighty have individual drive motors for functions – the Mighty has a twin drive motor for backrest and knee break functions

Design

The timeless, innovative design underlies Burmeier’s quality philosophy; this bed looks very attractive and offers uncompromisingly high quality and durability.

Mattress Height Adjustment – 300mm to 800mm

The adjustment range of 500mm allows the kingsize nursing bed to be used as either a low-entry bed or as a standard nursing bed.

The highest mattress position of 800mm allows nursing staff to work comfortably without stressing their backs.

Having beds according to type of use is no longer necessary. One bed for all cases.

Allura II Care Bed Specifications
Capacity:	250kg
Length:	approx. 2240mm
Width:	Allura II 100:	approx. 1110mm
	Allura II 120:	approx. 1210mm
	Allura Mighty:	approx. 1310mm
	High ⁄ Low:	300 to 800 mm, range = 500 mm
Mattress Base Size:	Allura II 100:	1000mm x 2000mm metal slats
	Allura II 120:	1200mm x 2000mm metal slats
	Allura Mighty:	1200mm x 2000mm mesh
Reverse Trendelenberg	14°
Ground Clearance	130mm
Total Weight	Allura II 100 — 120kg	Allura II 120 — 133kg
Castors:	100mm High–quality, rugged Tente castors
Lift Operation:	24 Volt (switch mode) Fully Electric
Backrest:	0° – 70°	Manual CPR release
Knee break:	0° – 30°
Finish:	Metal parts sealed with a polyester powder lacquer coating, colour topaz. Wooden surround with integrated side frames. Working timber areas melamine covered—0.6mm.
ARTG number:	208844

Allura II Care Beds Codes
EV94B4AAIIW	Allura II 100 Care Bed – 4 section, 1000mm x 2000mm base
EV94B8EKAAW	Allura II 100 Care Bed – 200mm extension to mattress platform
EV94B8CFAAW	Allura II 100 Care Bed – Timber Cover for Footboard
EV94B8CHAAW	Allura II 100 Care Bed – Timber Cover for Headboard
EV94B4AAMII	Allura II 120 Care Bed – 4 section, 1200mm x 2000mm base
EV94B4AAM	Allura II Mighty Care Bed – 4 section, 1200mm x 2000mm base
EV94B8CFAAM	Allura Mighty Care Bed – Timber Cover for Footboard
EV94B8CHAAM	Allura Mighty Care Bed – Timber Cover for Headboard
EV94B8EKAAM	Allura Mighty Care Bed – 200mm extension to mattress platform

Click here to enquire about the Allura II 100 Care Bed, EV94B4AAWII.

Click here to enquire about the Allura II 120 Care Bed, EV94B4AAMII.

Click here to enquire about the Allura Mighty Care Bed, EV94B4AAM.

Click here for a brochure

Click here for a Brief Note on Safety & Cleaning

Click here for a user's manual

Case Study — Vendlet on Allura Mighty

24 Volt Drive System as standard

Having the 240 Volts isolated, away from the bed and only 24 Volts at the bed means a safer environment for resident and maintenance personal. The switch mode of this system means that unlike other electric beds there is no current flowing through the bed control box and motors until a hand control button is pressed - a substantial saving from not being on standby.

With this system too, the maintenance intervals can be increased to 2 years.

Leakage current at the nursing bed need now only be measured every 10 years.

Residents are optimally protected, as all live 240 Volt components are outside the bed.

Openbus technology available on all Allura Beds except the Mighty.

Allura Mighty Bed (with optional timber cover for footboard) shown with Cherusker Bedside Locker/Overbed Table

Allura II 120 Bed (with optional timber cover for footboard) shown with Hermann Bedside Locker/Overbed Table

Mattress Codes – Allura II 100 Bed

EV9731 – Mid Pressure Care Mattress 2000 x 1000 x 150,
EV9732 – Frail Pressure Care Mattress 2000 x 1000 x 150,
EV9733 – Maxi Pressure Care Mattress 2000 x 1000 x 180

Mattress Codes – Allura Mighty Beds

EV9743 – Maxi Pressure Care Mattress 2000 x 1200 x 180 (Bravo Cover)

Allura II Care Bed Features;

mouseover for larger image

 

The Mattress Base with steel slat floor:
“Allura II 100”, 1000mm x 2000mm,
“Allura II 120”, 1200mm x 2000mm,
“Allura Mighty”, 1200mm x 2000mm

250 kg safe working load, 4-section mattress base, electrically adjustable. (applies to all Allura II models).
(weight includes mattress & accessories)

mouseover for larger image

 

Handset with selective locking and auto-contour function. Water resistant—IP64. Flush keys avoid accidental operation.

mouseover for larger image

Linak Drive System: 24 Volt drive system as standard
Power saving switch mode. Long intervals for maintenance. Residents are optimally protected, as all live 240 Volt components are outside the bed.

Fall protection height of side rails: approx. 400mm
Mattress and pressure ulcer systems of a maximum thickness of 160mm can be placed on the care bed without adaptable side rail extensions.

mouseover for larger image

Lowering Footend – reverse trendelenburg
Shows bed in chair position.

mouseover for larger image

Lowest entry height at 300mm
The mattress surface height adjustment can be adjusted from 300 to 800 mm. The unusually large adjustment range of 500 mm ensures a maximum of comfort care.

mouseover for larger image

Highest working height of 800mm
The highest mattress base position of 800mm provides a comfortable working height which is kind to carers' backs.
So this all–purpose bed is the only type of bed you'll need.

mouseover for larger image

LOWER-LEG rest
Electric Knee Break with manually adjustable lower leg rest.

mouseover for larger image

HIGH-QUALITY castors
100mm high-quality, rugged Tente castors.

mouseover for larger image

Bed Extension
Bed extension (with 4 longer wooden side rails 220cm) – can be retrofitted.

mouseover for larger image

TIMBER FOOTEND SURROUND (Optional)

Return to top of page