Drying Cabinets


APPLICATION The Malmet DC series of Drying Cabinets are designed to dry respiratory tubing, face masks, surgical instruments


SAFETY Dual over temperature cut-out. Set point temperatures are locked to prevent unauthorised change.
Cabinet temperature is pre-set at 70°C and governed not to exceed this temperature.


VERSATILITY A modular hanging system with shelving and trays to suit any requirement.


EFFICIENCY A centrifugal fan drives heated air downwards to provide rapid internal drying of suspended corrugated tubing and circulate warmth throughout the chamber.


RELIABILITY A quality cabinet built for years of continuous use. The Malmet factory is ISO9002 certified and all Malmet products are backed by a one year warranty
Anaesthetic Drying Cabinet
DC11 setup of
Anaesthetic Drying Cabinet

mouseover for another view

FLEXIBILITY A cabinet which can handle large loads with any combination of tubes and parts.


EASY INSTALLATION Connects to standard hospital power outlets; a vent connection removes heated air.


COMPACT Centre opening doors protrude only 330mm when fully open. Pass through wall units are available.


ECONOMY Double wall stainless steel construction with an insulated cavity, combined with double glazed doors. Heating is discontinued when doors are open.


HYGIENE A washable filter removes fluff, lint, dust etc.


COMPLIANCE Meets both AS2514 (Drying Cabinets for Medical Equipment) and As2774 (Drying Cabinets for Respiratory Equipment)

email Click here to enquire about the Malmet Anaesthetic Drying Cabinets.


Anaesthetic Drying Cabinet

Product Specifications — Product Codes — Spare Parts


PRODUCT SPECIFICATIONS
Outside Dimensions (mm) 1750h x 750w x 640d
Chamber Dimensions (mm) 1152h x 600w x 560d
Outside Dimensions Pass Through 1750h x 600w x 690d
Door Gasket Silicon Rubber
Doors Double Glazed Tempered, Centre Opening with Magnetic Door Closure
Air Vent Damper controlled to air-conditioner return duct or direct to atmosphere
Air Filter (mm) 150 x 150 x 15 washable polyurethane
Air Bleed Off Automatic Damper Control
Electrical (Australia Only) Plug into 15amp GPO
Shelves Electro polished stainless steel wire


Product Code    Model Description
8-A00-87-030 DC11S FRONT LOAD Mixed 6 wire shelves, 2 Racks of 18 x 37mm Dia Tube holders.
8-A00-87-035 DC11T FRONT LOAD Mixed 6 Wire Shelves 2 Racks of 18 x 37mm Dia Tube holders with Timer.
8-A00-87-040 DC12 FRONT LOAD 6 Full Width Wire Shelves - No Tube holders.
8-A00-87-045 DC12T FRONT LOAD 6 Full Width Wire Shelves - No Tube holders with Timer.
8-A00-87-051 DC13O FRONT LOAD Full Hanging, 5 Rack of 18 x 37mm Dia Tube Holders.
8-A00-87-055 DC13T FRONT LOAD Full Hanging, 5 Rack of 18 x 37mm Dia Tube Holders with Timer.
8-A00-87-060 DC21S FRONT LOAD & REAR UN-LOAD (PASS THROUGH), Mixed 6 wire Shelves 2 racks of 18 x 37mm Dia Tube Holders.
8-A00-87-065 DC21T FRONT LOAD & REAR UN-LOAD (PASS THROUGH), Mixed 6 wire Shelves 2 racks of 18 x 37mm Dia Tube Holders with Timer.
8-A00-87-070 DC22 FRONT LOAD & REAR UN-LOAD (PASS THROUGH), 6 Full Width wire Shelves-No tube Holders.
8-A00-87-075 DC22T FRONT LOAD & REAR UN-LOAD (PASS THROUGH), 6 Full Width wire Shelves-No tube Holders with Timer.
8-A00-87-081 DC23O FRONT LOAD & REAR UN-LOAD (PASS THROUGH), Full Hanging 5 Racks of 18 x 37mm Dia Tube Holders.
8-A00-87-085 DC23T FRONT LOAD & REAR UN-LOAD (PASS THROUGH), Full Hanging 5 Racks of 18 x 37mm Dia Tube Holders with Timer.


Spare Parts
MODEL DESCRIPTION
8-M00-87-033 Instrument Tray
8-M00-87-034 Air Diffuser Blank
8-M00-87-035 Air Diffuser (with holes)
8-M00-87-038 Anaesthetic Bag Holder
8-M00-87-093 Part width shelf DC11/DC21 models. Size 520d x 340w
8-M00-87-094 Part width shelf DC12/DC22 models. Size 520d x 600w
8-M00-87-095 10 x 50mm Diameter tube holder
8-M00-87-100 16 x 37mm Diameter tube holder (models prior to Feb 2002)
8-M00-87-104 18 x 37mm Diameter tube holder