Evocare Home Page
Return to home page


Search Alphabetical Product List

Inovia II Low Height Bed

Burmeier’s elegant 4 Section electric low height nursing home bed.




Inovia II Care 4 Section Electric Low Height Nursing Home Beds

Two Models — Two mattress widths

Inovia II
(900mm)

Inovia II 100
(1000mm)


mouseover for different view

Inovia II Care Bed
Inovia II Care Low Height Bed

Inovia II Care Bed

Design


The timeless, innovative design underlies Burmeier's quality philosophy; this bed looks very attractive and offers uncompromisingly high quality and durability — lifecycle of 20 years.


Mattress Height Adjustment – 220mm to 770mm


The innovative adjustment range of 550mm allows the nursing bed to be used as either a floorline bed or as a standard nursing bed.

The highest mattress position of 770mm allows nursing staff to work comfortably without stressing their backs.

Having beds according to type of use is no longer necessary. One bed for all cases; Inovia II Care Beds cater for all aged care clients: Bariatric, Falls risks (eg Dementia specific),etc. Hence there is no need to purchase addtional Bariatric and Floor beds.


Inovia II Care Bed

Click for Inovia II Care Bed Features

Click for Inovia II Care Bed Assembly Video


Inovia II Care Bed Specifications
Capacity: 225kg
Length: approx. 2220mm
Width: approx. 1040mm
High / Low: 220 to 770 mm, range = 550 mm
Mattress Base Size: EV94B1IA (Beech) 900mm x 2000mm
EV94B1IAW (Beech) 1000mm x 2000mm
Reverse Trendelenberg
Castors: 100mm Twin Wheel Tente castors can be locked in pairs.
Lift Operation: 24 Volt (switch mode) Fully Electric
Backrest: 0° - 70°
Knee break: 0° - 30°
Side Rails: DSG – Continuous Side Rail, one or both sides
VSG – Movable Split Side Rails, one or both sides
KSG – Combined Side Rails, one or both sides
SSG – Swiveling Side Rails, (both sides Inovia II 90 only)
Finish: Frame - Polyester Powder Coated
Wooden surround with integrated side frames.
Working timber areas melamine covered—0.6mm.
ARTG number: 208844

Inovia II Care Bed Codes
EV94B4IA – 900mm Inovia II Care Bed, low height, 4 section (Beech)
EV94B4IAW – 1000mm Inovia II Care Bed, low height, 4 section (Beech)

Click here for a brochure pdf

Click here for a user's manual pdf


24 Volt Drive System as standard


Having the 240 Volts isolated, away from the bed and only 24 Volts at the bed means a safer environment for resident and maintenance personal. The switch mode of this system means that unlike other electric beds there is no current flowing through the bed control box and motors until a hand control button is pressed - a substantial saving from not being on standby.

With this system too, the maintenance intervals can be increased to 2 years.
Leakage current at the nursing bed need now only be measured every 10 years.
Residents are optimally protected, as all live 240 Volt components are outside the bed.


Tilt function to chair position


Inovia II care comes standard with a tilt function which allows the bed to be transformed into a chair position. The seated ⁄ chair position provides a comfortable alternative for clients, and is also clinically beneficial. This option and the variety of positions available in between the lying position and seated position, assists in the prevention of pressure areas, promotes improved lung health and improved joint ⁄ muscle health (i.e. assists with back pain, hip pain, knee pain, etc by allowing the client to be fully supported in a variety of positions). The seated ⁄ chair position also allows a client to move from a lying position to a seated position without needing to be transferred at all, which saves manual handling for both the client and staff (reducing their risk of injury). In addition, it also allows the client to sit up and interact with their environment, whilst obtaining the clinical benefits of sitting.


email Click here to enquire about the Inovia II Care Bed.


email Click here to enquire about the Inovia II 100 Care Bed.

Various rail options:



VSG Side Rail

Inovia II Care Bed with VSG Side Rail, one side; DSG the other.



SSG Side Rail

Inovia II 90 Care Bed with SSG Side Rails.

  1. Full length rails as standard (DSG): very sturdy rails that can be easily removed if you prefer to have no rails. One side can be dropped down to facilitate a Half rail; providing the client with security but eliminating the restraint.
  2. Mobicare Split Side Rails (VSG): When rails are lowered the centre post can be removed or used for support getting in and out of the bed. The head section rails can be raised and leg section rails lowered allowing the user to exit the bed using the centre post for support, but still having protection on the top half of the bed. When the rails are down the position of the centre post can be changed.
  3. Combined Side Rails (KSG): When rails are lowered the centre post can be removed or used for support getting in and out of the bed. The head section rails can be raised and leg section rails lowered allowing the user to exit the bed using the centre post for support, but still having protection on the top half of the bed. The centre post is fixed in the centre position.
  4. Swiveling Side Rails (SSG): When rails are raised there is sufficient space between the rails to sit on the bed. When one end lowered the other end can be used as support to enter or leave the bed.

Mattress Codes


EV9721Mid Pressure Care Mattress 2000 x 900 x 150,
EV9722Frail Pressure Care Mattress 2000 x 900 x 150,
EV9723Maxi Pressure Care Mattress 2000 x 900 x 180,


Mattress Codes - Inovia II 100 Bed


EV9731Mid Pressure Care Mattress 2000 x 1000 x 150,
EV9732Frail Pressure Care Mattress 2000 x 1000 x 150,
EV9733Maxi Pressure Care Mattress 2000 x 1000 x 180


mouseover image to show Inovia II Bed’s
height range of 550mm

mouseover image to show Inovia II Bed’s
chair position

mouseover image to show
paired brakes on and off

Inovia II Bed low Inovia II Bed high
Inovia II Bed low Inovia II Bed high
Inovia II Bed Brakes Inovia II Bed Brakes


  • Inovia II Care Bed Features:

    roll mouse over number to see feature


  • 4–section mattress base 900 x 2000mm, with easy to clean, robust steel slats, metal colour “Titanium”.
  • Adjustable Gliding back support (0°–70°) reduces compression of the stomach and together with the knee–break elevation, plus upper–leg rest assists in optimising health and comfort.
  • Inovia II care comes standard with a tilt function which allows the bed to be transformed into a chair position.
  • Excellent hoist clearance allows the hoist to be moved in ⁄ out from underneath the bed. This helps prevent injury to staff caused by struggling to push ⁄ pull the hoist out from underneath the bed, where it can sometimes become caught. It also allows for the hoist to be positioned in the optimal position for client transfer, ensuring the client remains well positioned and safe at all times during the transfer.
  • The castors can be locked in pairs, either front
    or back.
  • Wooden surround in beech finish with working timber areas melamine covered.
  • Inovia II care can be lowered to a floor–to–bed height of just 22cm; providing increased safety to clients who are at risk of falling out of bed. In the lowest position the bed rails can be kept down or completely removed.
  • Bed height can be adjusted through a range of 55cm (from 22–77cm) which provides the staff with a vast option of suitable working heights.
  • This significantly reduces the risk of staff injury (i.e. reduced incidence of back,shoulder,neck & knee injuries)
  • Wooden surround with integrated side frames.
  • Linak drive system with 24 Volt power saving technology as standard: Clients and staff are optimally protected, as all live 240 volt components are outside the bed (only 24 volts at the bed).
  • If there is a Power outage, both bed and backrest can be lowered; providing the client with security and comfort.
  • Selectively locking handset (for patient safety) with auto–contour and locking of individual functions.
  • Low maintenance and spare parts costs: maintenance intervals can be increased to 2 years and handsets are very sturdy.
  • Safe working load: 225kg.



Assembling the Inovia II Care Bed (3 minute video)



top Return to top of page