Evocare Home Page


Guldmann Rail System Components

Enables the design of a ceiling mounted system which can be adapted to the existing environment.

Guldmann Logo

Room Rail System

The GH3 system is a modular design concept whose classic yet contemporary appearance makes sure GH3 installations blend perfectly with both new and existing buildings, architectural styles and interior design.

Three different types of rails are available as part of the GH3 system, each specially designed for particular spans and lifting weights. Combining these appropriately makes installation an easy, rapid process. The GH rails can be mounted on the ceiling, on walls or on supporting pillars – or any combination of these. The unsupported span can be as much as 8 meters, depending on the combination of rail types specified and which weights the system must be capable of bearing.


Combi-lock, switch track and turntable units make it even easier to configure the rail systems for any particular needs or any specific building, either within one room or as combination systems.

GH3 in use

The GH rails are designed to be easy to integrate into suspended ceilings. If the rails are mounted on the ceiling itself, they can be made to blend discreetly into the surroundings by the use of color or decoration. The ceiling hoists move near-silently along the rails using only a bare minimum of current. Transitions from one rail section to another are virtually unnoticeable, ensuring maximum comfort.


Guldmann System Components


top Return to top of page


top Return to top of page


top Return to top of page


top Return to top of page


Link to Evocare Install


top Return to top of page

© 2024 Evocare Australia Pty Limited. All rights reserved. ABN 98 078 566 604