Evocare Home Page
Return to home page


Search Alphabetical Product List

Dali-Low Entry Bed

Burmeier’s Nursing Home Care Bed – With extremely strong construction.




Burmeier Dali–Low Entry 4 Section Electric Bed

mouseover for larger image

Dali Low Entry Care Bed

Dali Low Entry Bed (with optional timber cover for footboard)

Dali Low Entry Care Bed

Dali Low Entry Nursing Home Bed

Key Points of Interest


  • 4-section mattress base 900 x 2000mm, with easy to clean, robust steel slats, metal colour “topaz”.
  • Adjustable Back Support and Upper Leg Rest.
  • Sit-up — chair — position.
  • The castors can be individually locked.
  • Wooden surround in beech finish with working timber areas melamine covered.
  • Mattress surface height adjustment is from approximately 220mm to 620mm, giving an adjustment range of 400mm.
  • Linak drive system with 24 Volt power saving technology, live 240 Volt components are outside the bed.
  • Selectively locking handset with auto-contour and locking of individual functions.
  • Push-fit connectors for ease of assembly and tough EPR cabling throughout.
  • Transport kit included.
  • 2 years warranty.
  • Safe working load: 175kg.

Design


Stacked

Stacked for Transport
or storage:
Great for saving space.

The timeless, innovative design underlies Burmeier's quality philosophy; this bed looks very attractive and offers uncompromisingly high quality and durability.


Mattress Height Adjustment – 220mm to 620mm


The innovative adjustment range of 400mm allows the nursing bed to be used as either a floorline bed or as a standard nursing bed.

The highest mattress position of 620mm allows nursing staff to work comfortably without stressing their backs.

Having beds according to type of use is no longer necessary. One bed for all cases.


Dali-Low Entry 24v Care Bed
Dali–Low Entry Care Bed Specifications
Capacity: 175kg
Length: approx. 2160mm
Width: approx. 1010mm
High / Low: 220 to 620 mm, range = 400 mm
Mattress Base Size: EV94B4DLE (Beech) 900mm x 2000mm
Reverse Trendelenberg
Castors: 75mm Tente castors
Lift Operation: 24 Volt (switch mode) Fully Electric
Backrest: 0° - 70°
Knee break: 0° - 35°
Foot end down: To 10°
Side Rails: DSG – Continuous Side Rail, one or both sides
ASG – Adaptable Side Rail, one or both sides
Finish: Frame - Polyester Powder Coated
Wooden surround with integrated side frames.
Working timber areas melamine covered—0.6mm.
ARTG number: 208844

Dali–Low Entry Care Bed Codes
EV94B4DLE – 900mm Dali–Low Entry Bed, low height, 4 section (Beech)
EV94B4DLEOTC Dali–Low Entry Bed, Timber Cover for Footboard
EV94B4DLEOTH Dali–Low Entry Bed, Timber Cover for Headboard

Mattress Codes


EV9721Mid Pressure Care Mattress 2000 x 900 x 150,
EV9722Frail Pressure Care Mattress 2000 x 900 x 150,
EV9723Maxi Pressure Care Mattress 2000 x 900 x 180,


Click here for a brochure pdf

Click here for a user's manual pdf

24 Volt Drive System as standard


Having the 240 Volts isolated, away from the bed and only 24 Volts at the bed means a safer environment for resident and maintenance personal. The switch mode of this system means that unlike other electric beds there is no current flowing through the bed control box and motors until a hand control button is pressed - a substantial saving from not being on standby.

With this system too, the maintenance intervals can be increased to 2 years.
Leakage current at the nursing bed need now only be measured every 10 years.
Residents are optimally protected, as all live 240 Volt components are outside the bed.


mouseover for larger image

Adaptable Side Rail up
Adaptable Side Rail down
DSG and ASG Side Rails

Optional, ASG – Adaptable Side Rail pdf


Dali Low Entry Bed low
Dali Low Entry Bed high
Dali Low Entry Bed Bed’s height range of 400mm
Dali Low Entry Bed sides down
Dali Low Entry Bed sides up
Dali Low Entry Bed Bed’s DSG Side Rails

email Click here to enquire about the Dali–Low Entry Care Bed.


Features:


mouseover for larger image

Footend
Timber Covers for Headboard and Footboard Ends (Optional)

The inner and outer wood footends give an attractive living design despite 400mm of height adjustment range


 
 
 
 
Fall protection height of side rails: approx. 430mm

Mattress and pressure ulcer systems of a maximum thickness of 190mm can be placed on the care bed without adaptable side rail extensions.


Handset
Handset

Handset with selective locking. Water resistant—IP64. Flush keys avoid accidental operation.


Lowered Foot Section
LOWERED–FOOTEND position

Lowering Footend Shows bed in chair position.


Power Supply
 
 
24V Power Supply

24 Volt drive system as standard
Power saving switch mode. Long intervals for maintenance. Residents are optimally protected, as all live 240 Volt components are outside the bed.


Back Support
Back Support

The powered Back Support has a range from 0° – 70°


 
 
 
 
Safe Working Load

Safe working load of 175kg.
(weight includes mattress & accessories)


 
 
 
 
Under Bed Clearance

Under bed clearance for all commercially available lifters.


Clearance
 
 
Bed Height Adjustment

MATTRESS BASE ADJUSTMENT
from approx. 220–620mm.
An innovative adjustment range of 400mm means that this bed can be used as a low-entry (Floorline) and a standard care bed. The highest mattress base position of 620mm provides acomfortable working height which is kind to carers' backs. So this all–purpose bed is the only type of bed you'll need.


Lower Leg Rest
Knee Break & Lower Leg Rest

Electric Knee Break with manually adjustable lower leg rest.


Locking Castors
Locking Castors

Individually locking, robust TENTE castors.


Stacked
Stacks for Transport or Storage

Great for saving space.





top Return to top of page